EMS-2003+ SMART MMT/ET TESTER
With EMS-2003+ smart metal magnetic memory eddy current detecting instrument, a new and quick detection for stress concentration caused by material discontinuity (defects) of the equipment in service will be carried out and early diagnostic results of equipment fatigue damage will be given out The instrument is equipped with various different shapes of transducers and meters for length measurement to meet inspection requirements of different shapes of components and so can be applied to NDT of boiler pressure vessels, pipes, blades, bearings, rails, gears, welds as well as other ferromagnetic metal components The magnetic memory eddy current detecting function of the instrument can be switched according to detecting requirements at will
- Main Feature
- Technical Parameter
- Application
● Function of 4-fre 4-channel EC and remote-field EC
● Fast high-precision/digital electronic balan
● Automatic/manual measure amplitude and phase
● Non-equal phase/amplitude alarming
● Independent storage of detecting programs
● Impedance plane and strip curve displays
● Parameter, graphic data can be transferred between instruments and microcomputers
● Eddy current graphics can be stored, replayed,analyzed and printed
● Parameter storage and recall at will Automatic calendar and time display
Magnetic memory detecting:
● High bright electroluminescence screen: EL 256x320
● Range of operating temperature: -25℃~+60℃
● Internal power supply: 14.8V 4AH (rechargeable lithium battery)
● External power supply: AC 220V
● Magnetic memory detecting
● Measurement channels: 8
● Minimum measurable distance: 1mm
● Maximum measurable distance: 150mm
● Maximum scanning velocity: 0.5m per sec
● Microprocessor: 16 bits
● Internal storge capacity: 16M
● Memorizer: 96M (can be expanded to 2G)
Eddy current detecting:
● Frequency range: 64Hz-5 MHz (Remote-field: 5Hz~5KHz)
● Four separate testing frequencies
● Gain: 0-90dB with step length of 0.5 dB
● The digital filtering of each channel is: High-pass 0~500Hz; Low-pass 10Hz~10kHz
can be applied to NDT of boiler pressure vessels, pipes, blades, bearings, rails, gears, welds as well as other ferromagnetic metal components. The magnetic memory/eddy current detecting function of the instrument can be switched according to detecting requirements at will.