EEC-30S EDDY CURRENT TESTER
Design with 2 independent testing channels, the equipment can collect 2 absolute eddy current signals or 2 differential eddy current signals at the same time The equipment can be used as two independent eddy current testers (each tester has two frequencies and one channel) The frequency range is from 64Hz to 5MHz, enabling the equipment to be used in departments of nuclear energy, electric power, petrochemical, avigation etc It s specially suitable to test defects and measure wall thicknesses of tubes and metal components of Copper, Ti, Zinc etc which are in-service Besides, EEC-30S can suppress interference signals and help to get a better test result
- Main Feature
- Technical Parameter
- Application
● Fast digital / analogue electric balance
● Unequal amplitude-phase/amplitude alarm modes
● Automatically measure the amplitude and the phase of signal
● Delay disappear of signal track
● Internal/external clock controlling synchronization alarm external output
● High accuracy reason、end tail signal excision function
● High accuracy real-time、time delay alarm output
● Computer digital parameter adjustment
● Menu type man-machine dialog (chinese/english)
● Real time dual channel impedance plane display and X-t, Y-t dual scan display mode
● Mass storage testing program, data, charts and other test results
● 2 independent frequencies
● 2 channels for 2 probes (expandable to 4、8.16 channels)
● Frequency range: 64 Hz～5 MHz
● Range of gain: 0～90dB with step of 0.5dB
● Phase rotation: 0～360° with step of 1°
● Gain ratio (Y/X): 0.1~10
● Detection speed: 150m / min
● Hardware alarm output: 8
used in departments of nuclear energy, electric power, petrochemical, avigation etc. It's specially suitable to test defects and measure wall thicknesses of tubes and metal components of Copper, Ti, Zinc etc. which are in-service.
Training Center
File Download
Service Center