Product classification
current location:Home  : :  Products : : Instrument : : Portable ECT

EEC-35++ Portable ECT Instrument

EEC-35++ 2-frequency & 2-channel eddy current instrument is designed with full digital electronic technique, eddy current technique and micro technique to meet different testing demands The two frequencies can help to get higher testing coverage, high testing frequency can be well used for surface inspection while low frequency has high sensitivity for subsurface defects With tube sheet function, EEC-35++ can get good result while testing defects and measuring wall thickness of in-service tubes (Cu, Ti, Al etc ) It’s widely used in departments of nuclear energy, electric power, petrifaction and spaceflight With mixing units, it can suppress disturbing signal caused by baffle, indent, sediment, and cold-working Designed with full-digital technique, users can easily store testing data and parameters and read them out for local testing
  • Main Feature
  • Technical Parameter
  • Application
● Mixing function to suppress noise signal with certain frequency, like mounting plate
● Tube sheet function to simulate the heat exchanger tubing layout, and to mark the testing status and testing result
● Connect with multiplexed probe sensors and test with multiplexed frequencies
● With built-in lithium battery which can work for 15 hours per charge
● Fast digital / analogue electric balance 
● Non-equiamplitude phase alarm/amplitude alarm 
● Automatic/manual amplitude and phase measure
● Store large testing data
● Real-time memorize multi-track eddy current signal 
● A-scan display, can be extended to C-scan display.
● Digital filtering 
● Colored real-time display of x-y impedance plane and strip chart signals
● With multiple frequency configuration analysis function 
● Rectangular coordinates and polar coordinates background can be selected
● 2 independent frequencies 
● Connect 2 probes
● 3 automatic mixing units 
● Frequency range: 64 Hz~5 MHz; 
● Range of gain: 0~90dB with step of 0.5/5dB 
● Phase rotation: 0~359° with step of 1° 
● Digital filter: 1-100 
● High filter: 0Hz-500Hz 
● Low filter: 10Hz-10KHz
● In-service, on-line, off-line inspection of seamless and welded pipes.
● Widely used for the inspection of heat exchanger tubes with tube sheet function.
● Well used for automatic testing of various components and parts, such as blade, wheel hub, gear, bolt hole, auto part, aircraft components etc.
● Sorting of materials, heat treatment condition, hardness etc.